Posted by Bill (IP: 207.150.152.165) on August 08, 1999 at 23:30:04:
In Reply to: Flywheel posted by Tommy Buckner on August 08, 1999 at 12:09:35:
That number you related is engineering# for block casting, doesn't mean a whole lot. Some of em are stamped with VIN #, but not all. Somebody
else can tell that better than I. As for your flyweel, count the number of teeth on the cracked one. 20 to 1 says there are 157. If there are, its easy.
Tell the guy at the parts store you need a 157 tooth flywheel for a C-4. Should be about $30, give or take. I don't beleive there were any C-4s
put behind any 50oz-in balance motors, but its easy to tell the difference in the balance jobs of the flywheels when you have them in front of you.
Late model jobs have a much larger weight! The question is, Why did that flywheel crack? Old age? Improper installation? Failure to use load spreader?
Whass up?