Posted by T.L. (IP: 158.252.164.91) on August 19, 1999 at 02:32:41:
In Reply to: For the LAST time... posted by T.L. on August 19, 1999 at 02:29:07:
if the car has REAR discs as you mentioned, and you intend to use them, you WILL need the proportioning valve that goes with that setup...
: Get the SPINDLES, ROTORS, CALIPERS, FRONT STEEL BRAKE-LINES & "FLEX-HOSES", MASTER CYLINDER, and BRAKE PEDAL. The prop.-valve on the '74 is the SAME as the '70-'73...'75-'77 used a different valve...
: : Righty.. due to the precarious nature of the doner (it might be shipped off anytime soon) I am thinking of having the nessesary parts removed and stored before it goes...
: : WHAT will I have to take off of it to save myself headache later on... the doner is a '74 disc all around (with the beautiful 9" rear which I'm also aquiring) and Alice is a 69.5...
: : Also considering taking the front springs too....
: : ( I want to do this pre swap as I want to be sure the rotors ar clean ect)