Posted by Ron S. (IP: 152.163.207.66) on August 03, 1999 at 21:04:21:
In Reply to: Big Three Part 1 - The 302 swap posted by Mark on August 03, 1999 at 10:30:31:
Motor mounts and "stands" (the 'thingies' that the motor mounts to in the car), frame re-enforcement bar (goes from framerail to framerail under the motor, and rear crossmember (where the trans mounts), an don't forget the V8 radiator...the "six's" rad' would probably not be "adequate" to cool your "new" 302