Posted by west (IP: 4.16.84.81) on April 06, 1999 at 16:29:37:
In Reply to: Just Tighten nut until it contacts rocker shoulder, then torque to 18-20 ft. lbs... posted by T.L. on April 06, 1999 at 13:40:29:
: ...& make sure you do it in the right sequence...
: : : Hey, welcome back. You cannot adjust valve-lash with non-adjustable rockers. Also, there is no need for adjustment if you have a hydraulic cam...
: :
: : : : NOW THAT I HAVE NEW HEADS ON MY 302, CAN ANYONE TELL ME HOW TO SET THE VALVELASH (IN LAYMEN'S TERMS) WITH MY NON-ADJUSTABLE ROCKERS? BY THE WAY, I HAVE BEEN OFF-LINE, AND IT'S GOOD TO BE BACK. GLAD TO SEE THE REGULARS LIKE PAULIE,N8,AND T.L. ARE STILL AROUND.
: : :I am confused then...how do I go about tightening the rockers then? I've bought a book on it, but it didn't make sense the way they talked about it. Any help would be appreciated....