Posted by Mark (IP: 192.62.107.213) on July 12, 1999 at 11:44:54:
In Reply to: 250 is suppose to have the small block bell housing pattern.n/m posted by 74merc on July 03, 1999 at 02:51:41:
: : The driveshaft should be switched over to a v8 driveshaft if you're planning on putting ANY horsies into this engine. It'll rip the old one in half. The six cyl. c4 needs the v8 bands and bellhousing, a good tranny shop should be able to swap your c4 over to v8 standards for around $75. You will need a new torque converter and bellhousing (not POSITIVE on the bellhousing...if you have a 250 it MAY work,but i know the 200 doesn't). Your cheapest route for the whole exchange would be to: a) win the lottery or b) get a donor car.