Posted by Mark (IP: 192.62.107.213) on July 13, 1999 at 10:34:12:
In Reply to: Re: cure ignorance of stall converters posted by raymond roland on July 11, 1999 at 20:12:41:
Well...the only suggestion that I have is to go with a tranny temp gauge prior to running the tranny cooler. Find the tranny fluid temp under stock conditions. Then...run the cooler per manufacturers recommendation, and check the tranny fluid temp again. Lastly, run the fluid through the tranny cooler by itself, note the temp again. This will be the only way that you can determine EXACTLY what the temp is doing. Otherwise, your just shooting in the dark.
Would be nice to have info on that correct operating temp for the tranny too...