Posted by Mark (IP: 192.62.107.213) on July 15, 1999 at 12:59:50:
In Reply to: Probably not... posted by Ron S. on July 14, 1999 at 21:19:56:
: ...IF your rockers don't have "rails" that "drop down" on the valve side to keep it 'centered' on the valve stem tip...this "feature" was 'limited' to Hi-Po 289 heads as I recall.
Well...there isn't much play with the pushrod slots in the heads. They fit pretty snug. If I went with rollers, I'd probably just do the screw ins and guide plates. Thanks