Posted by Erik (IP: 209.179.206.78) on October 25, 1999 at 15:41:42:
In Reply to: Disc Brake swap posted by Mavman on October 25, 1999 at 11:10:01:
Hello , the parts I used were from a 74 Maverick.I took spindles,calipers,rotors, and rubber hoses and I took the proportion valve.Everything bolted right in with no problems, and it took only about 15 min each side to remove from the 74 and about 2 1/2 hours each side to install on my 70 (because I had to clean parts and remove drums) I will be getting new pads soon but went with the old ones for now because of the lack of money.I am going to add a power booster eventually.I would recommend this swap , but get all the parts you can from one car so you don't have any guess work. :)