Posted by Tom Laskowski on July 23, 1998 at 21:33:16:
In Reply to: Re: Grabber stripes posted by Craig Selvey on July 22, 1998 at 22:22:16:
: You can go to all that trouble....or you can just but a set from either "The Maverick Connection" or AutoKrafters. I bought a set from the Maverick Connection and they were exactly "right on" in size, color, and fit.
: : What is the size of the "FAT" stripe on the side of the 71 Grabber? Does it go from in front of the front side marker to the rear of the rear marker lite,or does it start at the rear of the front marker lite to the front of the rear marker lite? Just how wide is this stripe?
: : Reason I ask is I have access to a sign machine at work and I think i can make a set of stripes,and what size is the "PIN" stripe that goes around it?
: : I have some pictures but there not very clear,so anyone have these on there MAV?
: : The "ROCKET" will be painted very soon,and thinking about putting the side stripes on .
: : Thanks
: : Tom
Cutting the stripes is no "trouble" takes less then ten mins on the machine and I can do any color.
I just need the size and where it starts and ends.
If anyone has a close up picture near the front side marker and the rear side marker please E-Mail if you have a scanner.
OR I can spend $200.00 for the stripes or just wing it.
Tom