Posted by Mark on August 09, 1998 at 23:42:12:
In Reply to: Crane Cams posted by Mustang on August 09, 1998 at 21:34:33:
Crane's catalog shows this particular cam only has 204deg intake duration
@ .050. I could be wrong, but I really think the only lope you'll hear with
it is when you pull a plug wire or two off, especially in a 351. This cam is
real close, numbers wise, to an 5.0 Mustang cam, although not roller. The fact that
it's not a roller will make it act a little lumpier than the 5.0 cam, but the harder
draw of the larger motor will smooth it right out.