Posted by Thomas Endicott on July 06, 1998 at 01:48:08:
In Reply to: TREE T0 FLOOR CONV. KIT posted by Robert on July 05, 1998 at 13:36:36:
I also have a 3 on the tree, with a 302. got the
power but shifting sucks. I was thinking about getting
a hurst on the floor. What model # do I need, how
much will it run and what modifications do I need to
do?
: I recently purchased a 72 Mav with a 302 manual,3 on the
: tree that was stuck in 2nd after a lot of fighting to
: access the tree and being stopped by a pressed on bearing
: below the steering wheel I decided to go to a floor shifter
: but chose a J.C.Whitney 3 speed tree to floor conv kit
: a 50.00 cheapy special bad idea after allot of modification
: to shifter finally got it to work but it is very stiff
: and hard to shift not to mention kinda cheesy I don't
: expect it to last long.CAN ANYONE RECOMMEND A GOOD AND
: SOLID CONVERSION KIT THAT WILL IMPROVE THE SHIFTING AND
: THE INSTALLATION ?
: THANKS ROBERT