Re: C-6 in a 69 1/2 mav?


[ Follow Ups ] [ Post Followup ] [ Maverick Message Board ] [ FAQ ]

Posted by Chris (IP: 209.30.122.26) on September 18, 1999 at 20:54:02:

In Reply to: C-6 in a 69 1/2 mav? posted by Devin Wolfe on September 18, 1999 at 13:21:50:

: I am puting a 302 into my 69 1/2 maverick. I have a C-6 transmition with torque converter. I was wondering if I could fit it in without too much modifications.

I have a 69.5 also, and i measured it for a FMX i have, even with the slightly smaller FMX (aka Cruise-o-matic, Merc-o-matic, etc. etc. etc.) it would require WAY too much work to squeeze in there. On later models of mavericks (maybe starting in '72?) it would be a LITTLE less work because the tunnel is larger to start with, but even then you'd be better off with a c4. Check around the local yards, you're likely to find a c4 for so cheap that it's worth the cost just to not have to mess around with the c6.


Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Maverick Message Board ] [ FAQ ]