Congradulations!!!!!!

[ Follow Ups ] [ Post Followup ] [ Maverick Message Board ] [ FAQ ]

Posted by Mark (IP: 192.62.107.213) on September 20, 1999 at 09:31:15:

In Reply to: Thanks Dan!! I'm heading for the junk yard!! (n/m) posted by Craig Selvey on September 18, 1999 at 08:30:13:

: : according to my source, "Cars and Parts American ID numbers" the code G is a 3:55:1 ratio for the 1974 model year.
: : : After reading with great interest all the messages below about getting a rear end "pumpkin" out of a Mustang II, I went to the junk yard today. I found a 1974 Mustang with a V-6, so does this mean it has 3.55:1 gears?

: : : I looked on the data sticker. The rear axle code was "G". So is this it? Did I find a treasure?

: : :
: : : Also, can I get this pumpkin and change it over to a posi by buying some parts?

: : : Need a little help...and hopefully others will benefit from this discussion.

Follow Ups:

Post a Followup

Name:
E-Mail:

Subject:

Comments:
: : : according to my source, "Cars and Parts American ID numbers" the code G is a 3:55:1 ratio for the 1974 model year. : : : : After reading with great interest all the messages below about getting a rear end "pumpkin" out of a Mustang II, I went to the junk yard today. I found a 1974 Mustang with a V-6, so does this mean it has 3.55:1 gears? : : : : I looked on the data sticker. The rear axle code was "G". So is this it? Did I find a treasure? : : : : : : : : Also, can I get this pumpkin and change it over to a posi by buying some parts? : : : : Need a little help...and hopefully others will benefit from this discussion.

Optional Link URL:
Link Title:
Optional Image URL:

[ Follow Ups ] [ Post Followup ] [ Maverick Message Board ] [ FAQ ]