Posted by rickyracer (IP: 209.20.173.77) on September 21, 1999 at 17:14:05:
In Reply to: Re: More head stuff... posted by Gdog on September 21, 1999 at 14:51:47:
:I'm assuming you mean you're using the rpm preformer cam, if so use the stronger valve springs. And don't forget to break the cam in properly.
Quick question, will the stock valve springs be good enough or should I go with a beefier set (from Edelbrock) to work with my Edelbrock Performer RPM???
: Thanks all, Gdog .
:
: : If you mean the swirl chamber heads, get them they are the preformence heads. Just a kittle porting in the exhaust side and they breath real good. Little bigger valves and ported and you got a good set of racing heads:
: :
: : How good are the heads from late '80's Mustang GT, the ones
: : : with heart shaped combustion chambers? Found a set that have been
: : : completely rebuilt for $200.00....
: : : Sorry too keep asking "head questions" but I'd like to get it right the
: : : first time.
: : : Thanks, Gdog .