Posted by T.L. on February 05, 1999 at 00:43:45:
In Reply to: Re: Where is the vacuum source? posted by Tom Laskowski on February 04, 1999 at 16:48:20:
It's been a LONG time since I removed all that stuff from my car, so if I've left anything out or didn't explain it exactly right, please feel free to add anything or correct me. Thanks...
:
: : I removed mine and installed an open element air cleaner years ago on my '73. To answer your question; there is a heat activated vacuum switch/valve that is screwed into the top of the water neck on the intake manifold, where the upper radiator hose goes. It has 3 vacuum fittings on it. One is connected to the full manifold vacuum, one goes to your distributor vacuum advance, and the other goes to your air cleaner sensor. Then from the sensor to the vacuum motor on the snorkle. When you start your car cold, full manifold vacuum is applied to the snorkle motor and holds the door shut so it can only suck in warm air blowing past the exhaust manifold heat stove. When the engine coolant reaches a certain temperature, the valve in that vacuum switch shuts off the vacuum to the air cleaner and the spring loaded "door" opens, letting in fresher air. I do NOT reccomend sticking a rag in your air cleaner in any weather. This will obstruct airflow and rob power as well as make the engine run "rich"....
:
: : : I like your ingenuity. It is not so cold here as to use such measures. I just want to hook it back up for starting help.
: Your real close TL so I'll leave at that