Posted by MW on August 25, 1998 at 23:46:22:
In Reply to: Hey Gang !! Here's one I haven't seen or heard about... posted by Ron S. on August 25, 1998 at 20:17:43:
I couldn't find a source 10 years ago, so I took a piece of .875 erw steel tubing,
can't remember wall thickness, but was in the .07-.09 range. We cut it long, packed
it with sand, and put a bend in it to clear distributor. Made end brackets, cut to length,
welded 'er up,painted, and bolted it to the bolts that are just forward of shock towers.
Looked as good as the Mustang items, and was a good place to tie wrap the MSD wiring to.
We used a telephone pole as our bend "mandrel", and looking back, the sand was probably
overkill, as the required bend isn't all that much.
Mark