Posted by N8 on September 11, 1998 at 07:20:35:
In Reply to: disc brakes posted by Ryan on September 11, 1998 at 01:24:38:
you'll need the master cyclinder,proportioning valve,I suggest getting the steel lins that run to the valve, and the spindles.
it looks easy but I havent converted mine over yet because I didnt get the steel lins to the proportioning valve. it is rather hard to find an adapter and I havent gotte around to making one......as soon as I find my round-tuit I'll get that conversion done.
: As soon as it gets below 100 degrees in Phoenix I'm going to the junk yard in search of disc brakes to put on my 73 Mav. What do I absolutely need to take off of the donor car. Lines, discs and calipers I'll buy new. I just need to know if I need anything besides the spindles.