Posted by Steve on September 19, 1998 at 13:44:20:
In Reply to: Re: How to remove the heater. posted by T.L. on September 17, 1998 at 02:35:41:
HUH?
Steve
: Well in that case, it'll be "cake"...
: : Forgot to mention this car has no AC and so far as I can tell never has.
: : Steve
: : : I decided to try and change the heater core while I was replacing the brake master cylinder. I couldn't for the life of me manage to get the heater unit to release from the firewall. I removed the nuts from 5 bolts that came thru the firewall that were in the right spots to hold the heater unit in. It still would not budge. I got the core out but kinda broke the plastic casing doing it. I'm going to need to get the whole thing out to put the new core in when it arrives and still can't figure out how to do it. The book I have says "Remove unit" so it's not much help. :-)
: : : Any help will be greatly appreciated.
: : : Thanks
: : : Steve