Posted by T.L. on October 28, 1998 at 02:05:00:
In Reply to: Re: Screw posted by Steve on October 27, 1998 at 23:23:51:
Hey, I'm in Colorado Too!...
: : The location of the screw would be about 2 or 3 inches or so down the cable. There is a tab on the cable that the screw goes thru.
: Ah, I see what you're talking about: the screw that attaches the cable guide to the heater control frame
: (or whatever you want to call that assembly). That screw is nice and tight. At the end of the cable is a
: coil, which slips over a metal tab on the back end of the temperature lever. Same setup on the Defrost/Floor
: lever. I can't see what was ever supposed to keep those cables on the tabs -- they just slip over them. I
: guess I'm amazed the Defrost/Floor cable hasn't come off too. I can slip the heater cable back over the tab,
: but it comes off again when I slide the lever a few times. I need to put something on the end of the tab to
: keep the cable from sliding off, like a tight little rubber band. No, that would dry out and crumble (Colorado
: is a very dry climate. I'll think of something.
:
: : ============================================
: : : Thanks for the great information! I gave up on taking the dash
: : : out and just settled for the instrument cluster, which was easy.
: : : Now the heater and wiper controls are more accessible, although I
: : : certainly wouldn't say that it's easy to get to the wiper control.
: : : BTW, the temp control lever on my 74 (no AC) has a little tab on
: : : the end, and a coiled wire just slips over it. I can't see that there
: : : was ever a screw or anything to really keep it there.
: : : Steve