Posted by 1BADMAV (IP: 205.188.199.196) on December 07, 1999 at 20:32:11:
In Reply to: Suspension Kits posted by Craig Selvey on December 07, 1999 at 19:01:33:
Craig,
I recently rebuilt my frontend with a PST kit. It fit great and handles good as far as I can tell( Can't drive to far with the car halfway disassambled). I ordered the Polygraphite kit and performance sway bar. The only problem I encounterd was that the lower control arm assembly did not have the Polygraphite bushing pressed in. I was alittle pissed when I went to do it. I have access to a good press but the catch is you have to first press the old one out, then press the bushing out of the metal sleeve insert and then reinstall. It was not easy and the lower control arms are not very sturdy I messed one up and had to getnother because it just crushed under the pressure. I put a pieceof bar stock between the next one so it would not crush also. We live , We learn :)