Posted by Mavman (IP: 192.62.107.213) on December 16, 1999 at 14:47:52:
In Reply to: Re: cant i just..... posted by Craig Selvey on December 15, 1999 at 21:39:32:
....then open the holes on the ends, inside, under the fenders.
: I would just cover up the slats somehow so that water can't get in there.
: ==================================
: : cut off the vent part the part with the slats in it where the wipers are lockated at of the cowl and fiber glass the under side and that will stop the water from comming in on the floor boards