Posted by MIKE (IP: 159.142.245.68) on December 28, 1999 at 11:47:50:
In Reply to: Buckets conversion... posted by Chris on December 28, 1999 at 04:21:32:
I'm in the process of putting a set of '96 Mustang GT seats in my '76. I needed to
make up spacers that measured 1 1/4 inches tall. These were installed
on the side closest to the trans. tunnel. Use square stock if you can, washers
look tacky, and you won't have the rigidity that the square stock will give you.