Posted by Mavman (IP: 204.181.93.63) on February 17, 2000 at 23:44:52:
In Reply to: Re: transmision posted by Charlie on February 17, 2000 at 00:38:22:
: You'll have to change clutch pedal assemblies & find a clutch linkage. Not quite as easy as it sounds. Scout your local junkyards. The clutch pedals will work from any Maverick, but the clutch linkage must be from a 6-cyl car. (If you find a V8 linkage let me know :) ). You'll also need the trans (of course) and a flywheel. The clutches are easy to change as far as clutches go. I assume by "support arm" you mean the crossmember, with the two slots in it for the trans mount? If so, then you can reuse that. -CP
So...what all would I need. The Grabber has a clutch pedal in it. Gonna get it for future use. Send me an email.