Posted by Erik (IP: 209.179.205.233) on February 20, 2000 at 22:15:08:
In Reply to: Re: Engine help , AGAIN!! :- ( posted by kswebb on February 20, 2000 at 11:42:04:
This morning , I replaced the cap, rotor, condensor, points, and I pulled both valve covers.Unfortunately the engine still runs like before, and there wasn't any apparent problems with the rockers or valves.But I can atleast get it started , and it runs but only if I change the speed frequently(like reving it a little then let off and then rev again, but if I let it ruin at any constant speed it dies).I am out of ideas, it is definitely getting fuel and air, no vacuum leaks, so I would have to say the problem is with the elec.(spark), but would it even run at all if spark was a problem?Any advice please.