Posted by TParker (IP: 4.33.1.93) on January 07, 2000 at 15:10:29:
In Reply to: vacuum hoses posted by J.Vogt on January 07, 2000 at 12:40:43:
I have an Edelbrock carb, the distributor vacuum line goes to the vacuum port on the Pasanger side of the carb on the front the middle lager port is for the PCV valve from the valve cover and the one on the drivers side is a full vacuum port and you can use it for the auto trans, or just plug it. on the vacuum tree all you need to hook up is the auto trans, power brakes, warm air inlet on the air cleaner( I assume you got an after marker air cleaner) if you don't have any of these just plug the hole in the manifold with a 1/2" plug.
: Hi i have a 302 with a performer RPM intake and a 600cfm edelbrock carb. i am having trouble finding where to put the vac. hoses that go from the "tree" in the back of the intake there are 4 places to put hoses i believe and i dont remember where they go. second where does the hose on the vacuum advance on the distributor go. thanks for any help