Posted by Dad (IP: 216.152.14.70) on January 27, 2000 at 22:35:24:
In Reply to: Power Steering posted by jeff w on January 27, 2000 at 22:14:04:
: I am still putting in the headers on my 73 Grabber I bought the bracket for the power steering unit but I am totally lost on what the heck to do with it I have yet to put the driver side header in but I do have the passenger side in. Can anyone tell me what to be prepared for when I get to the powersteering. Or point me to a date on the archives where I can find it.
: Thank You Jeff W.
: Remove power steering cylinder from the bracket on the drivers side frame rail. Remove the old bracket and replace it with the new one. This will lower the power steering cylinder to clear the headers. Be sure to remove the spark plugs or you may break them installing the headers.