Re: Granada/Monarch parts...


[ Follow Ups ] [ Post Followup ] [ Maverick Message Board ] [ FAQ ]

Posted by Mavman (IP: 216.12.231.150) on July 10, 2000 at 14:55:48:

In Reply to: Re: Granada/Monarch parts... posted by Charlie on July 10, 2000 at 12:03:44:

: I've heard that Granada/Monarch consoles fit nicely. If your car doesn't have disc brakes then Granada units will fit. If you need a rearend they are a bolt in. Engine parts, etc. Thats a hard question to answer, really, because the only parts that would be worth the time and money to use would be ones that you need. So what do you need?
: Mustang radiators 67-70 will fit but the outlets are in different postions. This usually means changing the water pump. -CP

: visit my website maverickgrabber.com


: : Which ones are worth the time/expense/effort of putting on my 74 Comet? I found about a half dozen today at the local u-pul-it while the only Mavericks I found were pretty well stripped out except the one had the full a/c system.

: : Another did have 3 pretty good looking wheel covers. They were definitely NOT show quality but they'd do well for a daily driver. They'd scraped a few curbs and the plastics centers were a littel discolored but clear.

: : What other radiators will fit on my Comet?

I pulled the hood prop off of a 77 Granada. It is the short one on the side. The only time I have to worry about it getting in the way is when I work with the master cylinder. It can be used on either side. Just make sure you put it close enough to the shock tower so that it will lay right on the radiator support and you can close the hood.



Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Maverick Message Board ] [ FAQ ]