Posted by kevin (IP: 205.188.196.24) on July 11, 2000 at 17:00:23:
In Reply to: Re: hood clearance posted by Jeff on July 11, 2000 at 03:32:28:
: I was also wondering if the throtle linkage will reach to the 2bbl carb when I have the adaper and everything on, or if I will have to get a custom cable
: Thanks
: Jeff
:i had to order a custom cable and throttle likage mount from clifford.also reused the end mounts from stock cable.you need abot 12 inches more cable.after lots of reengineering of these parts i have a pretty clean throttle setup.the problem with the adapter is the throttle is turned to the passenger side fender instead of the rear of the motor.