Posted by T.L. (IP: 199.182.62.99) on July 03, 2000 at 20:06:05:
In Reply to: Thats not necessary... posted by Charlie on July 03, 2000 at 17:05:38:
...so you will have to use a shorter rod on the master cylinder if you keep the stock pedal or it will be WAAY too high with the disc brake master cylinder. If you use the disc brake pedal, it will have to be machined for the plastic bushings to fit...
: The power brake pedal assembly is different but the manual is the same. Check out this link:
: Front Disc Swap
: : Ricky is as usual right on but he forgot to remind you about the break pedal. Take the whole thing from inside the car as well.
: : : they're the same parts, just change the master cyl. and take all the front brake lines to, they're a little different.