Posted by Charlie (IP: 131.204.141.37) on July 03, 2000 at 22:44:25:
In Reply to: The brake pedal I S different... posted by T.L. on July 03, 2000 at 20:06:05:
So you guys determined that that is the reason for the high brake pedal? The reason I said that is because I don't have the high pedal problem.. and I didn't change my pedal assembly. I did use a Granada master cylinder, but I was under the impression they are the same part number as the Mavericks.. Either way, could you just use a shorter rod? Fill me in here TL, it sounds like you have compared the two. -CP
: ...so you will have to use a shorter rod on the master cylinder if you keep the stock pedal or it will be WAAY too high with the disc brake master cylinder. If you use the disc brake pedal, it will have to be machined for the plastic bushings to fit...