Posted by Russ (IP: 63.168.194.39) on June 08, 2000 at 17:10:45:
In Reply to: Why not shim the studs? posted by Mavman on June 08, 2000 at 14:22:10:
The studs are too short for the locking part of the nuts to engage on the studs. So the nuts back off and lose all of the adjustment. I called Summit and they are sending me a set of studs that are for roller rockers, they are about and 1/8 of an inch longer. I think I will still need to add a shim under the new studs to get them to work. I just hope that there is enough threads left in the heads to hold the studs. Just a pain in the neck. Russ