Posted by TBR (IP: 24.4.254.16) on June 14, 2000 at 01:02:03:
In Reply to: $10 If you help me.. posted by Todd on June 13, 2000 at 23:57:10:
...If your question refers to whether the conectors must be connected, the answer is yes. How do you expect the control module to control the spark if it is not connected to the coil & distributor?
My book doesn't show anything after 1975, so I can't be sure this is truly applicable to your situation...but one connector is 3-pronged - it goes to the coil. The other is 4-pronged to the distributor. Hope this points you in the right direction;-)