Where did you get your front end parts RR? n/m


[ Follow Ups ] [ Post Followup ] [ Maverick Message Board ] [ FAQ ]

Posted by Mark G (IP: 130.191.3.11) on March 30, 2000 at 15:03:22:

In Reply to: Re: Need suspension parts!!! posted by rickyracer on March 30, 2000 at 10:58:36:

: :Auto Krafters is to Expensive on front end parts.
: replace both inner and outer tie rod ends,
: upper control arm bushings,
: front shocks,
: Centerlink,
: sway bar bushings,
: strut rod bushings,
: just replace the whole lower control arm, it's easier and quicker.
: front brake hoses,
: front rubber stops,

: and use the coil spring compressor type that goes "inside" the spring.
: probably need new lower spring mounts to. Just replaced all these parts on my 72 Grabber. Auto Krafters is much more $$$$ then other sources I found. And PST costs more also.
: any questions give me a yell, also need to know month/year built, manual/power steering.

: I have a 1970 Maverick 170 CID. I need to rebuild my suspension. It's getting to the point of being dangerous. PLEASE help me identify all the parts I would need to complete a rebuild.This is what I have so far as far what is offered on the internet.

: : Upper ball joint - 4 bolt
: : Control arm bushing - Lower
: : Idler arm bushing
: : sway bar link kit
: : coil spring isolaters

: : I know there is stuff I'm missing here. I just am not sure what there called. Any help would be greatly appreciated. This is my only car and it's getting very scary to drive. Riding the bus sucks. ;o|




Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Maverick Message Board ] [ FAQ ]