Posted by Shawn (IP: 136.2.1.101) on March 07, 2000 at 13:28:37:
In Reply to: Lots of info needed!!! please :)) posted by Inshan on March 06, 2000 at 19:18:14:
: ok guys, i have some questions for you. i asked some on the last board, but stefan wiped out the board right after i posted them up. i have a 74 comet with the 250, C-4.
: - how hard is it to put in a 5.0HO from a 92mustang etc. i know charlie has done this. what i need to know most is the electrical/electronic aspect of it. how difficult is it? do i have to change wiring harness etc.???
: - basically i need to know all the changes that must be made for this swap to work. i think the sump has to be changed too?
: - are there any connections (electronic) that run to the tranny? the guy at the junkyard told me that there are... he said i would have lots of problems trying this swap.
: - what parts will i have to get? so far, i know... V8 motor mounts, tranny crossmember?
: any help greatly appeciated guys, (and paulie!)
: thanks, Inshan
Ford MotorSport sells everything you need to put a fuel injected 5.0 in a street rod. All the wiring, which is in a nice neat package. You wont have to worry about having to much or to little wiring.