Posted by ryan (IP: 209.254.234.249) on March 07, 2000 at 20:05:03:
In Reply to: Re: Brakes posted by Shawn on March 07, 2000 at 13:11:41:
I took everything to convert to disc off of a 74 mav in the junkyard. All you really need to take are the spindles, backing plate and caliper bracket. Also try to get the steel line that goes from the rubber line through the fenderwell. then buy all new calipers, rotors, bearings and brake lines, and disc brake master cylinder for a 74 mav from a parts store. I used the stock proportioning valve and it seems to work fine. The conversion cost me a little over $200.