Posted by Earl Pillow (IP: 166.102.105.51) on May 18, 2000 at 18:20:18:
In Reply to: Door Panels help? posted by brihtstarr on May 18, 2000 at 17:49:27:
Not sure about the Krylon... I've had pretty good success using vinyl upholstery paint, which is made specifically to bond to vinyl and plastic. I wouldn't sand or anything, because all the scratches would be visible through your paint. Just make sure that it is absolutely squeaky clean, or else the paint will rub off in short order. As far as taking the door panels off, I have never done that specifically on a Maverick, but if it's like any other Ford, you have to take off the arm rest and any other hardware first, then the panel is secured to the door with clips that should just pop out if you pry gently around the edge.