Posted by Walter (IP: 207.221.93.215) on May 03, 2000 at 18:38:38:
In Reply to: C-4 to C-6 Conversion mounts posted by Darvin on May 02, 2000 at 19:37:16:
I used a mustang C6 cross member and modified to fit. Mods were a spacer as the frame where it bolts up to on the mustang is wider. Plus it needed to be stretched a little wider, but was a good starting point.
I put mine in behind a 351 Cleveland CJ, which they also say won't fit with out cutting, but mine did. The combo is mind blowing at the track and when people look under the hood.
: Does anyone know where to get a crossmember for a 1970 maverick
: that will support a C-6 trans.