Posted by Ken (32.102.155.164) on April 24, 2001 at 21:34:11:
In Reply to: Re: Shorty header exh system update posted by PAUL-E-D on April 24, 2001 at 12:08:07:
: No interfearance with the power steering sounds good. Would cars with a auto column shift still have to be converted to floor shift? I am assuming so but if you don't ask you won't know for sure.
..As of the moment my car is factory floor shift. I need to take a look at a column setup to be sure weather the head pipe would interfere with the linkage as the original pipe routed down through that area.
..The header outlet location is dictating mainly where the pipe has to go. I will be checking into these questions as they come up.
..Thanks for asking as I need to add this info to any dicriptions and drawings that will be prepared.
..A 2-1/2 inch system can also be built but must put a slight dimple in the headpipe near the mating flange to clear the steering arm when wheels are turned to extreme left otherwise every thing else is the same.
..The left header slides up from the bottom. The right can could be lowered in place from the top if needed. The engine doesnot have to be raised in any event.
..I will get the answer as soon as a look can be arrainged at another car.
..Ken