don't think you have to pull them off

[ Follow Ups ] [ Post Followup ] [ Maverick Message Board ] [ FAQ ]

Posted by 74merc (IP: 207.157.60.19) on August 08, 2000 at 18:49:40:

In Reply to: PS Control Valve question posted by Brian on August 07, 2000 at 09:06:11:

I've done mine, its been awhile tho... I'll go look at it again to be sure, but I think I got it done without dropping the lines.
it was interesting anyway...

: Getting ready to rebuild my '74's PS Control Valve/Pittman arm mount. Dumb question for those of you who have worked on this problem is: does the control valve have to be removed from the center link to get the guts out of the control valve? If so, I'll have to break one of my hoses (metal tubing will NOT let the fitting rotate by itself). Are PS hoses still available for the Maverick? So for the dumb question about the control va;ve, but, the rebuild kit (from NAPA) had no instructions...

:
: Thanks,
: Brian

Follow Ups:

Post a Followup

Name:
E-Mail:

Subject:

Comments:
: I've done mine, its been awhile tho... I'll go look at it again to be sure, but I think I got it done without dropping the lines. : it was interesting anyway... : : Getting ready to rebuild my '74's PS Control Valve/Pittman arm mount. Dumb question for those of you who have worked on this problem is: does the control valve have to be removed from the center link to get the guts out of the control valve? If so, I'll have to break one of my hoses (metal tubing will NOT let the fitting rotate by itself). Are PS hoses still available for the Maverick? So for the dumb question about the control va;ve, but, the rebuild kit (from NAPA) had no instructions... : : : : Thanks, : : Brian

Optional Link URL:
Link Title:
Optional Image URL:

[ Follow Ups ] [ Post Followup ] [ Maverick Message Board ] [ FAQ ]