Posted by Danny (IP: 206.157.27.91) on December 08, 2000 at 20:31:32:
In Reply to: Re: Transmision cooling lines posted by Daniel H Hardee Jr on December 08, 2000 at 20:12:51:
: : SO close and yet so far!!!
: : I swear if my driveline doesn't fit I reserve the right to scream....
: : Anyways, as you can guess the doner is not co-operating with the cooling lines. Anyone going to the mall this weekend?
: : I need 302/c-4 cooling lines.
OOOPPPS. hit the wrong button the first go round. The trans shop installed a c-4 in mine about 5 months ago and twisted the old lines in half trying to remove them, didnt have any replacements. he used the ends off the old lines and joined them with steel tubing using brass compression fittings. i was worried a bit, then he then pointed out when i had him install the external filter, you cut the lines and attach the filtration system in line by compression fittings. he says he does it all the time and totally safe, (maybe you can use this to get you riding until you can get the correct replacement).