Posted by Fastman (IP: 216.244.26.20) on December 23, 2000 at 00:20:47:
In Reply to: 302 CID Four bolt mains posted by 3rdMAV on December 17, 2000 at 19:32:33:
Just get a good 302 block and get a set of Milidon 4 bolt splayed main caps. A machine shop can drill and tap the block for the 4 bolts and you will be set. It is a very strong way to go and a heck of a lot cheaper than a BOSS or SVO block. Total costs would be around $100 for a block, $200 for the caps, and $150 for drilling, tapping, and align honing the block. So for $450 you will have a strong engine, appose to $800 for a BOSS block, or $2,000 for the SVO.