Posted by kEN (32.100.224.114) on January 14, 2001 at 12:26:05:
In Reply to: Swap out posted by Leo on January 13, 2001 at 17:59:43:
I you are looking for low and mid range power up to 5000 rpm here is a proven combo. Cam with a pulling unit for RV or truck use. It has equal duration on intake and exhust. Try crane for the recomendation. Be aware that this kind of cam will stop pulling hard above 5000. Get a factory cast iron 4 barrel intake and 600 cfm vac secondary carb,long tube headers. If auto trans, Summit has a 2200 rpm stall converter for C4. There about $160. With some fine tuning,this combo will move quite well with in the rpm band and cash outlay.