Posted by TBR (24.15.38.147) on May 10, 2001 at 22:58:19:
In Reply to: top loader 4spd hurst shifter posted by charles w carroll on May 10, 2001 at 21:08:45:
...Sadly, your only option is to relocate the lines. You also have some cutting to do. That's what I did dropping a 4speed/Hurst into my 70 w/ the 200. The tunnel was very narrow & I had to cut through the upper bracing to remove the entire driver side half. Then I fabricated a steel "bulge" to clear the linkage. The other option is to bag the 4speed and get a T-5;-)