Posted by Craig Selvey (209.212.219.41) on May 06, 2001 at 08:57:39:
In Reply to: Re: Yes...it is all in one switch. n/m posted by Skippy on May 05, 2001 at 22:43:52:
-----------------------------------------------
Since you are no longer going to be using the column sfift on your car, the neutral safety switch on it will no longer be functional. I would take it off the column and unplug it from the wiring harness. Cut the "plug", along with as much wire as you can, off of the switch. I would then splice into those wires, and plug it back into the wiring harness under the dash.
-----------------------------------------------
: ok thanks craig - one more question for ya though - is ok to splice and divide the two wires from the original switch so I can connect the two switches at the floor shifter?Beings there are now 2 switches instead of one.