Posted by rickyracer (IP: 131.191.7.4) on November 06, 2000 at 10:56:04:
In Reply to: Front Suspension Inspection posted by Fred on November 05, 2000 at 23:39:15:
If everything is still orginal factory, get ready to replace it all. Strut rod bushings could be bad, A arm bushings, ball joints, shocks, sway bar bushings, steering inner/outer tierod ends, end link, pitman arm, centerlink, steering linkage rag joint rubber disc. Any and all of these parts could be the problem. On a older car when you replace one it stresses the other old parts.
: Where should I start in inspecting the front suspension in my '72 Grabber. Tires are new and balanced, however it exhibits a shimmy at speeds above 60mph and it's a bit noisy over bumps. Any suggestions? Thanks