Posted by #88 (IP: 63.16.115.221) on October 19, 2000 at 21:05:50:
In Reply to: Ok guys and gals, please read. posted by Fastman on October 19, 2000 at 19:46:44:
: Ok , here is what I did. I measured both of my drive shafts (in car and old one), the one in my car is approx. 45 inches long, while my old one is approx. 3/4 of inch longer. So now I know I have a problem with the lengths, but if I bring the drive shaft back to the shop to have it lengthened, how much movement is the driveshaft allowed to have while it is in the car. Movement meaning, going over a bump the slip yoke moves out of trans a bit, what is the amount of movement for the stock one(just out of curiosity). So, does anyone agree this may be my vibration?
re;look on your front yook see shinny part 1.25" out from seal.. that will work/..