Re: What parts do I need to add PS to an OE non PS car.

Re: What parts do I need to add PS to an OE non PS car.
Re: What parts do I need to add PS to an OE non PS car. -- Mark Suarez	Post Reply	Top of thread	Maverick Message Board

Posted by: hoop ^Ž
2001/07/24, 11:55:02

Author Profile

:OK, i know that I need the P/S pump and bracket from a 200 I6, I also know that I will need the steering box. What about the other parts? I am about to put my engine back in and thought that, if I was going to make the swap, now would be the time to do it. If anyone has the parts for this swap e mail me. Thanks

On mav,comets the steering boxes are the same, You have to change the pitman arm because the center linkage is different because it has a hydraulic type cylinder on it. I have everything to do the swap off of a 76 mav, ps pump, center linkage complete with cyl,and tie rod ends and the pitman arm and the bracket for ps pump and the bracket that holds the cyl up to the frame on the driver side. If your interested I'll take $65.00 plus shipping for everything. You didn't leave your email address

Post Reply | Alert

Original message Top of thread Return to the MMB

Replies to this message

Hoop --- Mark Suarez ( 2001/07/24, 16:34:44 ) ( 44 bytes )
Are the P/S and non P/S steering boxes the same? --- Mark Suarez ( 2001/07/24, 16:37:46 ) ( 91 bytes ) +3

Re: Are the P/S and non P/S steering boxes the same? --- hoop ( 2001/07/24, 18:46:05 ) ( 377 bytes )
Re: Are the P/S and non P/S steering boxes the same? --- hoop ( 2001/07/24, 18:46:22 ) ( 377 bytes )
Re: Are the P/S and non P/S steering boxes the same? --- Ryan ( 2001/07/24, 20:07:04 ) ( 281 bytes )

Re: PS cars have 16:1, nonPS have 22.5:1 or 19:1 n/m --- Charlie Ping ( 2001/07/24, 22:54:45 ) ( 830 bytes )