Posted by: TBR ®
2001/06/19, 14:41:55
|
...I fabricated them from some scrap aluminum barstock we had at work. I ground them into a wedge shape & drilled the appropriate holes. I had to use longer balljoint bolts to accomodate the extra thickness & used angled zerks because the balljoint sat lower in the a-arm. There are no spec's, I eyeballed everything until it fit. The whole idea was to get the balljoint back to vertical because it was binding on bumps. As for pre-fab kits, the Mustang ones will work. Hope that helps;-)
|
