Posted by: rickyracer ®
2001/06/22, 22:34:38
|
rubber against the crossmember on both sides of crossmember. also should be a steel pipe that fits over the strut shaft. The position of the nuts on both sides against the large washers is your one of your front end adjustments.
:I tried to call PST but they all went home for the week end.I have a question about the strut rod bushings. On the factory bushings there is a steel "cup" that rides against the front side of the crossmember. It has a rubber bushing made into it. Do I need to use this steel "cup" or does the polygraphite bushing face ride against the crossmember itself? If you have installed one of the kits I would be thankful for some advise. Russ
|
