3.73's I do believe... n/m
Re: 2800rpm@90mph.....What gears?????? n/m -- JC	Post Reply	Top of thread	Maverick Message Board

Posted by: 74merc ® 2001/12/07, 23:39:53 Author Profile

::hehe ::looks better than my POS crossmember... ::I may get a T5 sometime as well, my cousin is getting a Tremec, I'll probably snatch his T5 while he isn't looking. It certainly won't be going in anytime soon... ::I'm not that happy with the AOD... how's the saying go? you can't polish a terd? ::mostly I want overdrive, I'm not too worried about it holding up, I don't get to race very often... :: :::I have undertook the T-5 swap since I now have a temporary second car (its for sale BTW). I used a 1995 Cobra tranny because it was cheap ($400) and is the strongest production T5 avaliable. ::: :::Problems: You name it I had it. The 94-95 Mustang trannies are different from all others (longer input shaft=longer bellhousing). I used the stock 95 bellhousing but had to cut a hole in it for my shifter fork. I really didn't want to do it but the stock cable clutch location interfered with my header. I plan on buying a early T5 scattersheild soon, and fabricating an aluminum spacer so it will work. The early T5s have the same fork location as the Maverick. ::: :::I had to fabricate a crossmember, which was really no big deal. ::: :::Shifter location is almost identical to my toploader. An early T5 would put it father forward which would probably be a good thing, but I have no problem with the location. ::: :::Speedo cable works with the T5 speedo gear. ::: :::The drivehshaft had to be 2" shorter. I did some research and some measuring, and it was a stroke of luck that FOrd Racing Performance Parts aluminum driveshaft was the perfect lentgh(45.5)! It comes with U-joints AND the T5 yoke included for just $160, which I figured couldn't be matched by shortening my driveshaft + the cost of a yoke. ::: :::I can't say whether this driveshaft will work for anyone else because I run a mystery 9" yoke that I bought at a swap meet. ::: :::Its great. I can go 90 at 2800 RPMs and hopefully I will be running 12s next trip to the track because I probably shaved 100lbs off the car in the process. ::: :::It's not the prettiest thing in the world but I had limited time to get it on the road. When I finally get my combination done right (eventually want a Tremec) I can do a better job. I attached a pic of my nasty crossmember.

Post Reply | Alert

Original message Top of thread Return to the MMB